PCB Buffer · Cooling Storage · Model ZCL-3BL
PCB Cooling Storage Buffer ZCL-3BL for Cooling + Decoupling
Combine active cooling and storage capacity after reflow. The ZCL-3BL reduces board temperature and provides buffering time before AOI or downstream handling.
| Model | ZCL-3BL |
| Function | Cooling + storage |
| Best For | Post-reflow buffering before AOI |
| Interface | SMEMA compatible |
| Integration | Inline SMT conveyor |
Technical Specifications
| Function | Active cooling plus storage buffering to decouple reflow and downstream stations |
| Cooling Method | Forced air cooling (configuration dependent) |
| Storage Mode | Indexed storage conveyor (configuration dependent) |
| PCB Width Range | 80 – 650 mm |
| PCB Length Range | 80 – 650 mm |
| Conveyor Height | 900 20 mm (SMEMA standard) |
| Interface | SMEMA compatible |
| Power Supply | 220V / 50Hz |
Optional Configuration
| Cooling Zone Length | Configurable based on temperature drop requirement |
| Storage Capacity | Configurable capacity based on desired buffering time |
| Rail Width Adjustment | Manual adjustment or motorized width adjustment |
| Signal / Control | Tower light, buzzer alarm, and custom handshake integration on request |
Who This Buffer Fits Best
After Reflow
Reduce temperature and add time before AOI to stabilize inspection and handling.
When AOI Is a Bottleneck
Storage capacity prevents reflow output from forcing line stops during AOI slowdowns.
Heat-Sensitive Assemblies
Cooling reduces risk of component shifts or handling damage while boards are hot.
Compared with Cooling Buffer
Cooling storage adds capacity/time; cooling buffer is shorter and focused on temperature only.
Related Products
Need Cooling + Buffer Time After Reflow?
Tell us your reflow output temperature, AOI takt time, and desired buffering minutes. Well recommend the right configuration.