Nitrogen Wave · Model SA-450N
SA-450N
Nitrogen wave soldering machine delivering reduced dross and superior solder joint quality.
| Model | SA-450N |
| Power | ~70KW |
Technical Specifications
| Power Supply | 3-Phase 5-Wire / 380V / Cable>=25 sq mm |
| Total Power | ~70KW |
| Startup Power | ~30KW |
| Operating Power | ~12KW |
| Control System | PC + PLC Control |
| Cooling Method | Cross-flow Fan |
| Exhaust Duct Diameter | Phi 195mm |
| SprayAir Pressure | 0.2Mpa~0.4Mpa |
| SprayMotion | Stepper Motor |
| Auto Flux Replenishment | Standard |
| Preheat Method | Micro-circulation Hot Air |
| PreheatTemperatureControl | PID |
| Temperature Range | Ambient ~200degC |
| TopPreheatZone & Insulation Cover | 2-stage Micro-circulation Hot Air(Tempered Glass Insulation Cover-Optionalitem) |
| BottomPreheatZone Count | 3-stage Micro-circulation Hot Air |
| Solder PotTemperature Control Method | PID |
| Solder Pot Heating Power | 18KW |
| Flat Wave Height | 15mm(Effective Wave Height) |
| Wave Height Adjustment | Variable Frequency + Digital Control |
| Solder Pot Type | Mechanical + Stainless Steel Flow Channel |
| Solder PotMaterial | Cast Iron Molding + Enamel Process |
| Solder Pot Loading Method | Manual Electric Operation In/Out |
| Solder PotCapacity | 500KG |
| Conveyor Direction | L-R/R-L |
| Conveyor Speed | 400-1800mm/min |
| Conveyor SpeedControl Method | VFD Closed-loop Stepless Speed Control |
| Conveyor Motor | 90W Fixed-speed Motor |
| Conveyor Rail Angle | 4~7degadjustable |
| WidthRange | 50mm~450mm |
| Conveyor Height | Inlet Height ~:750mm+/-50mm |
| Conveyor Rail/Track Load | 25Kg/M |
| Claw Cleaning System | Circulating Pipe + Brush |
| Claw Cleaning Motor | 220V 30W |
| Chain Finger Type | Dual Round Claws |
| Nitrogen Filling Distribution | Partial N2 Filling(Solder Pot); |
| Oxygen Analyzer | Single Channel |
| Nitrogen Consumption | 1000~10000 ppm,~15m3/h |
Optional Configuration
| Chain Finger Type (Optional) | (Optional:Heavy-duty Duck Claws) |
| Nitrogen Filling Distribution (Optional) | (Optional:Full-zone N2 Filling) |
| Management Authority Function | Programming, Debugging, 2-Level Password Authorization |
Who This Machine Fits Best
Fine-Pitch Assembly
Designed for BGA, QFN, and other fine-pitch components requiring precise thermal profiling.
Nitrogen Environment
Oxygen levels below 1000 ppm minimize oxidation and improve solder joint quality.
Dual-Track Option
Dual-track models support simultaneous processing of two independent panels.
Related Products
Need to Solder Wider or Complex Boards?
Tell us about your board sizes and production volume. We’ll recommend the right wave soldering setup.
Get a Quote