Vietnam · Electronics manufacturing · Repeat order
Lite-On Vietnam PCB Handling Repeat Order
2 × SL-3BM automatic PCB loaders, 2 × PTG-D350 dual-track flippers and 5 × PTG-460 single-track flippers.
Configuration illustration. Actual equipment layout varies by project; project facts below come from verified internal records.
Project situation
The repeat order required mixed magazine loading and board-flipping equipment with both left-to-right and right-to-left flow. It also required automatic width adjustment, MES connection readiness and defined board-width handling.
Documented equipment configuration
The SL-3BM loaders support shared 803/809 magazine formats with front/rear lift support. The order also includes dual-track and single-track flippers, with confirmed direction quantities for both line flows.
| Project status | Repeat order |
|---|---|
| Equipment scope | 2 × SL-3BM automatic PCB loaders, 2 × PTG-D350 dual-track flippers and 5 × PTG-460 single-track flippers. |
| Destination | Vietnam · Electronics manufacturing |
| Evidence basis | Customer order review, production plan, shipment/change record or repeat-order document. |
What the records verify
The May 28, 2026 customer order review explicitly identifies the order as a repeat order and lists nine units, their outgoing models, quantities, directions and control-component requirements.
This case is published to show real project scope and configuration logic. Final equipment selection for another factory must still be checked against PCB size, process, target UPH, layout and utilities.
Related equipment and selection resources
Check a Similar Configuration for Your Factory
Send your PCB size, process, target UPH, line layout, destination and required equipment. S&M will compare it with this project and recommend the closest practical configuration.