Jiangmen Jianghai manufacturing base · SMT equipment since 1997
SMT Equipment Manufacturing Capabilities
S&M operates a 100,000 m² manufacturing base covering parts production, oven assembly, PCB handling equipment assembly, finished-goods storage and engineering offices.
Real reflow oven assembly at the S&M manufacturing base.
Five floors, separated by manufacturing role
| Floor | Primary function | Why it matters to buyers |
|---|---|---|
| 1F | Sheet-metal fabrication, machining and component production | Controls core frame, panel and machined-part production before assembly. |
| 2F | Main equipment and oven assembly | Dedicated assembly for reflow, wave soldering and thermal-process equipment. |
| 3F | PCB handling equipment assembly | Supports higher-volume loader, unloader, buffer, conveyor and transfer production. |
| 4F | Finished-goods warehouse | Separates completed equipment for packing and shipment control. |
| 5F | Office, engineering and business functions | Connects project review, mechanical/software engineering and delivery coordination. |
Monthly production capacity
50 reflow ovens
Air, nitrogen, dual-track, wide-body, vacuum and project-specific reflow configurations.
50 wave soldering machines
In-line, off-line, nitrogen and selective-soldering programs.
500 handling units
Loaders, unloaders, buffers, link conveyors, shuttle conveyors, flippers and special transfer equipment.
People behind the production system
200+ production staff
Parts production, mechanical assembly, electrical assembly, equipment integration and packing.
40 quality staff
Incoming checks, process checks, electrical/safety inspection, functional testing and final inspection.
40 engineering staff
Project engineering and technical coordination across standard and non-standard equipment.
20 mechanical R&D
Mechanical design, transport structure, custom board handling and equipment-layout adaptation.
20 software R&D
PLC/HMI logic, recipes, alarms, automatic width control, SMEMA/MES interfaces and project functions.
Vietnam + Thailand coverage
Local engineering/service teams and spare-parts support cover customers across both countries.
From metal parts to complete SMT equipment
S&M manufactures sheet-metal and machined structures in-house, then completes assembly, controls integration, software setup and equipment testing. Selected electrical components, modules and motion components are sourced from qualified suppliers.
From sheet metal to equipment assembly
These photographs document actual fabrication and assembly stages at the S&M manufacturing base. They show how machine frames and oven structures move from metal preparation into mechanical assembly.
Inspection and testing equipment
Electrical and safety
- Ground continuity and insulation resistance testing
- Withstand-voltage testing
- Current, voltage and power checks
- Emergency-stop and interlock verification
Thermal process
- Multi-channel temperature profiling
- Zone-temperature stability checks
- Conveyor-speed verification
- Nitrogen flow and oxygen-level checks where configured
Handling equipment
- Rail-width and parallelism measurement
- Board-transfer and sensor testing
- Lift, shuttle and buffer cycle testing
- SMEMA and configured MES interface checks
Exact inspection items follow the equipment configuration and project requirement. CE and ISO 9001 certification information is available on the Certifications page.
Manufacturing proof in customer programs
Large programs require coordination across design, sheet metal, machining, procurement, assembly, software and quality—not just catalog equipment.
Foxconn Vietnam
Four nitrogen reflow ovens and 194 handling units documented as delivered, followed by another oven order.
Foxconn India
148 handling units across nine configurations in a structured production plan.
Quanta Thailand
Seven vertical curing ovens and a separate 484-unit handling program.
Manufacturing capability FAQ
Which processes are completed in-house?
Sheet-metal fabrication, machining, equipment assembly, controls integration, software setup and equipment testing are managed within the manufacturing system. Selected purchased components come from qualified suppliers.
What is the production capacity?
Current monthly capacity is approximately 50 reflow ovens, 50 wave soldering machines and 500 PCB handling units.
Where is the factory?
The manufacturing base is in Jianghai District, Jiangmen, Guangdong, China.
Do you provide support in Vietnam and Thailand?
Yes. Local engineering/service coverage extends across both Vietnam and Thailand.
Send Your Equipment or Line Requirement
Share the PCB size, process, target UPH, equipment scope, layout and destination. Our engineering team will check the configuration against manufacturing and delivery capacity.