Stop magazine changes from slowing down your SMT line
Side-entry loading gives operators easier magazine access without blocking the front of the line. Built for high-mix SMT factories that need stable board feeding, cleaner operator movement, and less waiting before the printer or conveyor.
The real problem is not loading boards. It is line rhythm.
A PCB loader should not become the small machine that slows down the whole SMT line. The buyer needs stable transfer, easy magazine handling, clear SMEMA communication and a configuration that matches the actual factory layout.
Problems this page should prevent
- Operators crowd the line front when replacing magazines.
- The printer waits because board feeding rhythm is not stable.
- Different board sizes require frequent adjustment and operator judgement.
- A generic loader fits the board, but not the actual line layout.
Why this model is useful
- Side-entry magazine structure improves access in crowded production lines.
- 50 × 50 – 500 × 550 mm PCB range covers most standard SMT boards.
- Manual or motorized width adjustment supports high-mix work.
- SMEMA interface helps connect with printer, conveyor, buffer or downstream equipment.
What to send before quotation
PCB size, board thickness, magazine size, board weight if relevant, line direction, conveyor height and one photo or sketch of the station position.
Why choose S&M instead of a generic PCB loader supplier?
One team checks the handling line
S&M supplies loaders, unloaders, buffers and conveyors. That reduces interface mismatch and supplier blaming when stations do not run smoothly together.
Configuration before quotation
We check whether a standard model fits first. If your board or layout needs another loader type, we tell you before quoting the wrong machine.
International-line expectations, local-price structure
For standard PCB handling stations, many factories do not need international-brand pricing. They need stable transfer, clean integration and fast response.
Verified technical specifications
The table keeps verified parameters from the current S&M product page. Final configuration still depends on PCB size, layout and production rhythm.
| Loading Method | Side entry magazine |
| PCB Size | 50 × 50 – 500 × 550 mm |
| PCB Thickness | 0.6 – 4.0 mm |
| Magazine Compatibility | Standard SMT magazines |
| Interface | SMEMA compatible |
| PCB Size (Min) | 50 × 50 mm |
| PCB Size (Max) | 500 × 550 mm |
| Rail Width Adjustment | Manual or motorized option depending on configuration |
| Magazine Capacity | 30 – 50 boards per magazine |
| Cycle / Transfer Logic | Automatic indexing and board handoff for unmanned loading sequence |
| Conveyor Height | 900 ± 20 mm (SMEMA standard) |
| Power Supply | 220V / 50Hz |
| Rail Adjustment | Manual width adjustment or motorized width adjustment |
| Signal / Control | Tower light, buzzer alarm, and custom handshake integration on request |
When to choose it — and when not to
Choose this model when
Choose side-entry when the line needs magazine loading, but front-side access is crowded or operators need easier side replacement during production.
Do not choose it blindly when
Do not choose it blindly if your line requires direct inline feeding, delicate vacuum pickup, or oversized heavy boards. In those cases, compare inline, vacuum, suction or heavy-duty loaders first.
Before you buy, check these points
- PCB size range and future product size changes.
- PCB thickness, board weight and surface sensitivity.
- Magazine size, magazine capacity and access direction.
- Left-to-right or right-to-left line direction.
- Conveyor height, SMEMA signal and upstream/downstream station position.
- Whether you also need matching unloader, buffer or conveyor.
Related SMT equipment
Use these links to match the loader with downstream board handling and soldering equipment.
Get the right side-entry loader configuration before you buy
Send your PCB size, magazine size, board thickness and line direction. If you have a station photo or sketch, mention it in the form and we will ask for it by email after submission.
Get a loader recommendation
We usually reply within 1 business day. Your information is used only for quotation and technical communication.
FAQ
Can S&M match this with my current line?
Yes. Send conveyor height, line direction and SMEMA requirements. The loader can be matched with existing SMT equipment when dimensions and signals are clear.
Can you customize size or direction?
Yes, depending on board size, magazine format and line layout. We confirm the configuration before quotation instead of forcing one standard model.
What makes the quote faster?
Send PCB size, thickness, magazine size, target UPH, line direction and a photo of the station. This avoids back-and-forth and wrong configuration.