Full-area vacuum suction loader for delicate, thin, or flexible PCBs. Prevents board warping and surface damage during loading.
| Loading Method | Vacuum suction |
| PCB Size | 50×50 – 500×550 mm |
| PCB Thickness | 0.4–4.0 mm |
| Interface | SMEMA compatible |
| Conveyor Height | 900 ± 20 mm |
Technical Specifications
| Loading Method | Vacuum suction (full-area) |
| PCB Size (Min) | 50 × 50 mm |
| PCB Size (Max) | 500 × 550 mm |
| PCB Thickness | 0.4–4.0 mm (thinner boards supported) |
| Conveyor Height | 900 ± 20 mm (SMEMA standard) |
| Interface | SMEMA compatible |
| Power Supply | 220V / 50Hz |
Optional Configuration
| Rail Adjustment | Manual width adjustment or motorized width adjustment |
| Signal / Control | Tower light, buzzer alarm, and custom handshake integration on request |
| Machine Direction | Left-to-right or right-to-left line direction to match plant layout |
| Vacuum Handling | Vacuum zone layout and suction strength options based on PCB type |
Who This Loader Fits Best
Thin & Flexible PCBs
Boards thinner than 0.6mm or flexible PCBs that cannot be edge-gripped without damage require vacuum handling.
High-Value Assemblies
Medical, aerospace, and high-reliability boards where surface scratches or board flex during loading are unacceptable.
Compared with Suction Loader
Vacuum loader applies suction across the full board area; suction loader uses localized cups. Full-area vacuum is gentler for very thin boards.
Compared with Standard Loaders
Standard loaders use edge rails or mechanical gripping. Vacuum loading reduces mechanical contact with the board surface.
Related Products
Suction PCB Loader
Suction cup loader for boards with irregular shapes or specific pick points.
Inline PCB Loader
Standard inline loader for non-sensitive boards in high-volume lines.
Protect Your Most Delicate PCBs
Our engineers will advise on the right vacuum loader configuration for your board type and production requirements.